Unirac SM™/U-LA™, Top Mount End Clamp

$1.90 $1.32
(You save $0.58)
(No reviews yet) Write a Review
SKU:
302002C
Availability:
Available
Weight:
0.20 LBS
Shipping:
Calculated at Checkout
Warehouse:
PCD
Top Mount End Clamp

Unirac SolarMount™ | U-LA

Top Mount - End Clamp

Save time and money with SOLARMOUNT,  the world’s most versatile PV mounting system.

The universal SOLARMOUNT™ rail system has three options that can be assembled into a wide variety of PV mounting structures to accommodate any job site: SOLARMOUNT Flush, SOLARMOUNT High Profile Tilt, and SOLARMOUNT Low Profile Tilt.

Key Benefits

Maximum flexibility
Flush, high-profile or low-profile configurations for all locations.

Ease of installation
Minimized penetration with longer attachment spans than competitive products

Complete technical support
Installation and code compliance documentation

Core component for Unirac mounting solutions
Incorporated into other major product lines

SolarMount End Clamp Features

• End clamp material: One of the following extruded aluminum alloys: 6005-T5, 6105-T5, 6061-T6
• Ultimate tensile: 38ksi, Yield: 35 ksi
• Finish: Clear or Dark Anodized
• End clamp weight: varies based on height: ~0.058 lbs (26g)
• Allowable and design loads are valid when components are assembled according to authorized UNIRAC documents
• Values represent the allowable and design load capacity of a single end clamp assembly when used with a SolarMount series beam to retain a module in the direction indicated
• Assemble with one Unirac ¼”-20 T-bolt and one ¼”-20 ASTM F594 serrated flange nut
• Use anti-seize and tighten to 10 ft-lbs of torque
• Resistance factors and safety factors are determined according to part 1 section 9 of the 2005 Aluminum Design Manual and third party test results from an IAS accredited laboratory
• Modules must be installed at least 1.5 in from either end of a beam

SolarMount End Clamps

 Part #               
 Description
 302001C  SM End Clamp - Size A, w/ HDW, CLR    
 302002C  SM End Clamp - Size B, w/ HDW, CLR
 302002D  SM End Clamp - Size B, w/ HDW, DRK
 302003C  SM End Clamp - Size C, w/ HDW, CLR 
 302003D  SM End Clamp - Size C, w/ HDW, DRK 
 302004C  SM End Clamp - Size D, w/ HDW, CLR 
 302004D  SM End Clamp - Size D, w/ HDW, DRK
 302005C  SM End Clamp - Size E, w/ HDW, CLR
 302005D  SM End Clamp - Size E, w/ HDW, DRK
 302006C  SM End Clamp - Size F, w/ HDW, CLR
 302006D  SM End Clamp - Size F, w/ HDW, DRK
 302007D  SM End Clamp - Size G, w/ HDW, DRK
 302008C  SM End Clamp - Size J, w/ HDW, CLR
 302008D  SM End Clamp - Size J, w/ HDW, DRK  
 302009C  SM End Clamp - Size K, w/ HDW, CLR  
 302009D  SM End Clamp - Size K, w/ HDW, DRK  
 302010C  SM End Clamp - Size L, w/ HDW, CLR  
 302011C  SM End Clamp - Size M, w/ HDW, CLR  

 

SolarMount End Clamp Capacity

Applied Load
Direction
Average Ultimate lbs
(N)
Allowable Load lbs
(N)
Safety Factor,
FS
Design Load lbs
(N)
Resistance Factor,
Φ
Tension, Y+ 1321 (5876) 529 (2352) 2.50 800 (3557) 0.605
Transverse, Z± 63 (279) 14 (61) 4.58 21 (92) 0.330
Sliding, X± 142 (630) 52 (231) 2.72 79 (349) 0.555

 

Top Mount Sizing for SM™, SMi™, U-LA™

sm-end-clamp-sizing.jpg

 

Top Mounting Clamp Installation Detail

 sm-ula-clamps.jpg

 

CLR = Clear Anodized
DRK = Dark Bronze Anodized (BLACK)
W/HDW = Includes appropriate T-Bolts or Hex Head Bolts and Flange Nuts
Price and specifications are subject to change without notice.

 

 

solarmounti-warranty.jpg

SolarMount is covered by a 10-year limited product warranty and a 5-year limited finish warranty.